ZyXEL Communications LTE7460-M608 - 7.15 Remote Management Screen

Chapter 7 Networking
LTE7460-M608 User’s Guide
76
7.15 Remote Management Screen
Remote management allows you to determine which services/protocols can access which LTE7460-
M608 interface (if any) and from which computers. The following figure shows remote management of
the LTE7460-M608 coming in from the WAN.
Figure 60 Remote Management from the WAN
Note: Remote management does not work if the Secured Client IP Address field does not
match the client IP address, or if there is a firewall rule that blocks it.
Click Networking > Remote Management to open the following screen.
MAC Address This field displays the device’s MAC address.
Profile This field displays the type of bandwidth profile for the device.
Action Click Edit to go to the screen where you can edit the MAC address and/or the
bandwidth management profile.
Click Delete to remove the device from the list.
Apply Click Apply to save your changes back to the LTE7460-M608.
Reset Click Reset to reload the previous configuration for this screen.
Table 28 Networking > Bandwidth Management
LABEL DESCRIPTION