ZyXEL Communications LTE7460-M608 - 6.10 Using UPnP in Windows 7 Example

Chapter 6 Home Network
LTE7460-M608 User’s Guide
55
Figure 42 Network Connections: My Network Places: Properties: Example
6.10 Using UPnP in Windows 7 Example
This section shows you how to use the UPnP feature in Windows 7. You must already have UPnP installed
in Windows XP and UPnP activated on the LTE7460-M608.
Make sure the computer is connected to a LAN port of the LTE7460-M608. Turn on your computer and
the LTE7460-M608.
Auto-discover Your UPnP-enabled Network Device
1 Click Start and Control Panel. Then click the Network and Sharing Center.
2 In the left pane, select Change advanced sharing settings to display the Home or Work section.
3 In the Network Discovery section, select the option for Turn on network discovery and click the Save
changes button.