LTE7460-M608 User’s Guide
40
CHAPTER 6
Home Network
6.1 Overview
A Local Area Network (LAN) is a shared communication system to which many computers are
attached. A LAN is usually located in one immediate area such as a building or floor of a building.
The LAN screens can help you configure a LAN DHCP server and manage IP addresses.
6.1.1 What You Can Do in this Chapter
• Use the LAN IP screen to set the LAN IP address and subnet mask (Section 6.2 on page 41).
• Use the DHCP screen to assign IP addresses on the LAN to specific individual computers based on
their MAC Addresses (Section 6.3 on page 42).
• Use the Static Route screen to configure static routes in your LTE7460-M608 (Section 6.4 on page 44).
• Use the UPnP screen to enable UPnP (Section 6.5 on page 45).
• Use Connected Devices screen to view current clients information (Section 6.6 on page 45).
Note: These screens are not available if your LTE7460-M608’s operating mode is on bridge
mode. To learn more about changing your LTE7460-M608’s operating mode see
Section 7.2 on page 59.
6.1.2 What You Need To Know
The following terms and concepts may help as you read this chapter.
To Next Page
Loading...
