Chapter 5 Internet
LTE7460-M608 User’s Guide
34
Figure 19 Internet > PIN Settings
The following table describes the labels in this screen.
5.5 APN Configuration Screen
Use this screen to view or configure a connection profile. A connection profile defines the parameters
that you need to connect to a mobile network, such as the Access Point Name (APN), user name and
password. Click Internet > APN Configuration. The screen appears as shown next.
Table 8 Internet > PIN Settings
LABEL DESCRIPTION
PIN Protection
Enable PIN Protection Click On to turn on PIN code authentication. Click Off to turn off PIN code
authentication.
A PIN (Personal Identification Number) code is a key to a SIM card. Without the PIN
code, you cannot use the SIM card.
Enable Save PIN Select this for the LTE7460-M608 to save the SIM card PIN code, and avoid reentering
the PIN code everytime you log in.
Change PIN Code
Current PIN Enter the default or existing PIN code for the inserted SIM card.
New PIN Configure a new PIN code for the SIM card. You can specify any four to eight digits
to have a new PIN code.
Confirm New PIN Enter the new PIN code again for confirmation.
Apply Click Apply to save your changes back to the LTE7460-M608.
Reset Click Reset to reload the previous configuration for this screen.
To Next Page
Loading...
