Chapter 5 Internet
LTE7460-M608 User’s Guide
35
Figure 20 Internet > APN Configuration
The following table describes the labels in this screen.
Table 9 Internet > APN Configuration
LABEL DESCRIPTION
APN Configuration
Select APN Profile Select Auto to reload the default profile. Otherwise, select Manual to configure a
connection profile.
MTU Specify the Maximum Transmission Unit (MTU) for each packet or frame sent in the
LTE7460-M608’s network.
Apply Click Apply to save your changes back to the LTE7460-M608.
Reset Click Reset to reload the previous configuration for this screen.
2nd APN for TR069 Access Point Names (APNs) are provided by your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS (Multi-
Media Messaging Service) and charging method.
You can include a second APN profile to allow TR069 services to go by the second
APN while the rest of the traffic goes by the first APN.
Enable 2nd APN Check to enable a second APN profile.
APN This field displays the Access Point Name (APN) in the profile.
You can enter up to 30 printable characters [A-Z][a-z][-]. Spaces are not allowed.
To Next Page
Loading...
