Chapter 4 Tutorials
SBG3300-N Series User’s Guide
105
11 Select Optional encryption (connect even if no encryption) and the Allow these protocols
radio button. Select Microsoft CHAP Version 2 (MS-CHAP v2) and clear all of other check boxes.
Click OK.
12 Click IPSec Settings. Then select the Use pre-shared key for authentication checkbox. Enter
the pre-shared key used in the IPSec configuration that the Device is using for the
Default_L2TPVPN IPSec VPN rule. In this example, enter 1234567890. Click OK.
To Next Page
Loading...
