SBG3300-N Series User’s Guide 177
CHAPTER 8
LAN
8.1 Overview
A Local Area Network (LAN) is a shared communication system to which many networking devices
are connected. It is usually located in one immediate area such as a building or floor of a building.
Use the LAN screens to help you configure a LAN DHCP server and manage IP addresses.
8.1.1 What You Can Do in this Chapter
•Use the LAN Setup screen to set the LAN IP address, subnet mask, and DHCP settings of your
Device (Section 8.2 on page 179).
•Use the Static DHCP screen to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses (Section 8.3 on page 182).
•Use the UPnP screen to enable UPnP and UPnP NAT traversal on the Device (Section 8.4 on page
184).
•Use the Additional Subnet screen to configure IP alias and public static IP (Section 8.5 on page
185).
•Use the 5th Ethernet Port screen to configure the Ethernet WAN port as a LAN port (Section 8.8
on page 195).
To Next Page
Loading...
