Chapter 1 Introducing the Device
SBG3300-N Series User’s Guide
20
None of the LEDs are on if the Device is not receiving power.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
POWER Green On The Device is receiving power and ready for use.
Blinking The Device is self-testing.
Red On The Device detected an error while self-testing, or there is a device
malfunction.
Off The Device is not receiving power.
ETHERNET
LAN 1-4
Green On The Device has a successful Ethernet connection with a device on the
Local Area Network (LAN).
Blinking The Device is sending or receiving data to/from the LAN.
Off The Device does not have an Ethernet connection with the LAN.
ETHERNET Green On The Gigabit Ethernet connection is working.
Blinking The Device is sending or receiving data to/from the Gigabit Ethernet
link.
Off There is no Gigabit Ethernet link.
DSL Green On The ADSL line is up.
Blinking The Device is initializing the ADSL line.
Off The ADSL line is down.
Orange On The VDSL line is up.
Blinking The Device is initializing the VDSL line.
Off The VDSL line is down.
INTERNET Green On The Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
DSL connection is up.
Blinking The Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
MOBILE Green On The 3G WAN connection is working.
Blinking The Device is sending or receiving data to/from the 3G WAN connection.
Off There is no 3G WAN connection.
USB Green On The Device recognizes a USB connection.
Blinking The Device is sending/receiving data to /from the USB device connected
to it.
Off The Device does not detect a USB connection.
WLAN/WPS Green On The wireless network is activated.
Blinking The Device is communicating with other wireless clients.
Green
and
Orange
Blinking The Device is setting up a WPS connection.
Off The wireless network is not activated.
To Next Page
Loading...
