ZyXEL Communications SBG3300-N000 - 6.3 The 3 G WAN Screen

Chapter 6 Broadband
SBG3300-N Series User’s Guide
133
6.3 The 3G WAN Screen
Use this screen to configure your 3G settings. Click Network Setting > Broadband > 3G WAN.
Rate Limit Enter the rate limit for the connection. This is the maximum transmission rate allowed for
traffic on this connection.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 10 Bridge Mode (ADSL over ATM) (continued)
LABEL DESCRIPTION