SBG3300-N Series User’s Guide 296
CHAPTER 21
PPTP VPN
21.1 Overview
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of data
from a remote client to a private server, creating a VPN using TCP/IP-based networks. PPTP
supports on-demand, multi-protocol and virtual private networking over public networks, such as
the Internet.
PPTP sets up two sessions and uses Generic Routing Encapsulation (GRE, RFC 2890) to transfer
information between the computers. It is convenient and easy-to-use, but you have to make sure
that firewalls support both PPTP sessions.
PPTP works on a client-server model and is suitable for remote access applications. For example, an
employee (A) can connect to the PPTP VPN gateway (X) as a PPTP client to gain access to the
company network resources from outside the office. When you connect to a remote network (B)
through a PPTP VPN, all of your traffic goes through the PPTP VPN gateway (X).
Figure 126 PPTP VPN Example
21.2 What You Can Do in this Chapter
•Use the Setup screen to configure the PPTP VPN settings in the Device (Section 21.3 on page
297).
•Use the Monitor screen to view settings for PPTP clients (Section 21.4 on page 298).
To Next Page
Loading...
