ZyXEL Communications SBG3300-N000 - Configuring the L2 TP VPN Setup (Server)

Chapter 4 Tutorials
SBG3300-N Series User’s Guide
87
4 Click Apply.
4.13.2 Configuring the L2TP VPN Setup (Server)
1 Go to the VPN > L2TP VPN > Setup screen and configure the following:
• Select the Enable checkbox.
•Set Access Group 1 to 192.168.2.0/255.255.255.0.
•Select DNS as User Defined and enter a DNS server address. The DNS server address in this
example is 8.8.8.8.
• Click Apply.