Chapter 4 Tutorials
SBG3300-N Series User’s Guide
83
4 The new configuration will appear on the VPN settings screen. You can click the VPN name to
begin PPTP connection.
5 Enter the username and password of your user account configured on the Device.
Note: The user account must have been configured in the Maintenance > User
Account screen. Refer to Chapter 29 on page 325.
6 You can see Connected when the PPTP VPN connection has been established. Click the connection
name to get connection details. There you can also disconnect.
4.12.4 Configuring PPTP VPN in iOS Devices (Client)
The following sections cover how to configure the built-in PPTP client in iOS devices (iPhone, iPad,
iPod Touch, etc). Due to GUI difference among various iOS devices, the figures may not match what
your iOS device displays. The example settings in these sections match the PPTP VPN configuration
example in Section 4.12 on page 65.
To Next Page
Loading...
