ZyXEL Communications SBG3300-N000 - Example 3: Configuring a Site-To-Site with Dynamic Peer Rule; Example 4: Configuring a Remote Access Rule

Chapter 4 Tutorials
SBG3300-N Series User’s Guide
64
3 You can see the new IPSec VPN rule you’ve just created in the VPN > IPSec VPN > Monitor
screen. Select this rule and click Connect.
4.11.3 Example 3: Configuring a Site-to-Site with Dynamic Peer Rule
Select Site-to-Site with Dynamic Peer in the Application Scenario field in the General
section. Other parameters are the same as example 1’s.
4.11.4 Example 4: Configuring a Remote Access Rule
Select Remote Access in the Application Scenario field in the General section. Other
parameters are the same as example 1’s.