Chapter 13 Interface Group
SBG3300-N Series User’s Guide
244
13.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Group screen to open the following
screen. Use this screen to create a new interface group.
Note: An interface can belong to only one group at a time.
Figure 92 Interface Group Configuration
The following table describes the fields in this screen.
Criteria This shows the filtering criteria for the group.
Modify Click the Delete icon to remove the group.
Table 68 Network Setting > Interface Group (continued)
LABEL DESCRIPTION
Table 69 Interface Group Configuration
LABEL DESCRIPTION
Group Name Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
Grouped LAN
Interfaces
Available LAN
Interfaces
Select one or more LAN interfaces (Ethernet LAN or wireless LAN) in the Available LAN
Interfaces list and use the left arrow to move them to the Grouped LAN Interfaces list to
add the interfaces to this group.
To remove a LAN or wireless LAN interface from the Grouped LAN Interfaces, use the
right-facing arrow.
Automatically
Add Clients
With the
following DHCP
Vendor IDs
Click Add to identify LAN hosts to add to the interface group by criteria such as the type of
the hardware or firmware. See Section 13.2.2 on page 245 for more information.
# This shows the index number of the rule.
To Next Page
Loading...
