ZyXEL Communications SBG3300-N000 - 12.3 The Dynamic DNS Screen

Chapter 12 Dynamic DNS Setup
SBG3300-N Series User’s Guide
241
12.2.1 Add/Edit DNS Entry
You can manually add or edit the Device’s DNS name and IP address entry. Click Add new DNS
entry in the DNS Entry screen or the Edit icon next to the entry you want to edit. The screen
shown next appears.
Figure 89 DNS Entry: Add/Edit
The following table describes the labels in this screen.
12.3 The Dynamic DNS Screen
Use this screen to change your Device’s DDNS. Click Network Setting > DNS > Dynamic DNS.
The screen appears as shown.
Figure 90 Network Setting > DNS > Dynamic DNS
Table 66 DNS Entry: Add/Edit
LABEL DESCRIPTION
Host Name Enter the host name of the DNS entry.
IP Address Enter the IP address of the DNS entry.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.