Chapter 4 Tutorials
SBG3300-N Series User’s Guide
111
2 Select VPN > Add VPN Configuration….
3 Select the L2TP tab. Enter the following fields.
• Description: Enter a name for your VPN configuration.
• Server: This is the WAN IP address of the Device, in this example, 172.16.1.2.
• Account: This is the user account created on Device for accessing the network via VPN.
• RSA SecurID: Not used in this configuration.
• Password: This is the password for account.
• Secret: This is your pre-shared key for your VPN connection, in this example, 1234567890.
• Send All Traffic: This example uses the route-all configuration (ON).
4 Save the configuration.
To Next Page
Loading...
