Chapter 7 Wireless
SBG3300-N Series User’s Guide
149
Click Network Setting > Wireless to open the General screen.
Figure 33 Network Setting > Wireless > General
The following table describes the general wireless LAN labels in this screen.
Table 19 Network Setting > Wireless > General
LABEL DESCRIPTION
Wireless Network Setup
Wireless You can Enable or Disable the wireless LAN in this field.
Band This shows the wireless band which this radio profile is using. 2.4GHz is the frequency used
by IEEE 802.11b/g/n wireless clients.
Channel Set the channel depending on your particular region.
Select a channel or use Auto to have the Device automatically determine a channel to use.
If you are having problems with wireless interference, changing the channel may help. Try
to use a channel that is as many channels away from any channels used by neighboring APs
as possible. The channel number which the Device is currently using then displays next to
this field.
more.../less Click more... to show more information. Click less to hide them.
To Next Page
Loading...
