ZyXEL Communications XGS1930-52HP - Filtering; Chapter 12 Filtering; Filtering Overview; What You Can Do

Chapter 12 Filtering
XGS1930 Series User’s Guide
127
CHAPTER 12
Filtering
12.1 Filtering Overview
This chapter discusses MAC address port filtering.
Filtering means sifting traffic going through the Switch based on the source and/or destination MAC
addresses and VLAN group (ID).
12.1.1 What You Can Do
Use the Filtering screen (Section 12.2 on page 127) to create rules for traffic going through the Switch.
12.2 Configure a Filtering Rule
Use this screen to create rules for traffic going through the Switch. Click Advanced Application > Filtering
in the navigation panel to display the screen as shown next.
Figure 96 Advanced Application > Filtering