Chapter 4 The Web Configurator
XGS1930 Series User’s Guide
54
4.7.2 Restore Custom Default
Press the RESTORE button for three to six seconds to have the Switch automatically reboot and restore
the saved custom default file. See Section 3.3 on page 32 for more information about the LED behavior.
4.7.3 Reboot the Switch
Press the RESET button to reboot the Switch without turning the power off. See Section 3.3 on page 32 for
more information about the LED behavior.
4.8 Logging Out of the Web Configurator
Click Logout in a screen to exit the web configurator. You have to log in with your password again after
you log out. This is recommended after you finish a management session for security reasons.
Figure 37 Web Configurator: Logout Screen
4.9 Help
The web configurator’s online help has descriptions of individual screens and some supplementary
information.
Click the Help link from a web configurator screen to view an online help description of that screen.
To Next Page
Loading...
