XGS1930 Series User’s Guide
48
Figure 34 Wizard > QoS > QoS Setting
Each field is described in the following table.
4.4 The Status Screen
The Status screen is the first screen that displays when you access the web configurator.
The screens may very slightly for different models.
The following figure shows the navigating components of a web configurator screen.
Table 14 Wizard > QoS > QoS Setting
LABEL DESCRIPTION
QoS Setting
Select all ports Select all ports to apply settings on all ports.
You can select a port by clicking it.
High Select ports and click the High button, so they will have high priority.
Medium Select ports and click the Medium button and, so they will have medium priority.
Low Select ports and click the Low button, so they will have low priority.
Finish Review the information and click Finish to create the task.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
