ZyXEL Communications XGS1930-52HP - Bandwidth Control; Chapter 14 Bandwidth Control; Bandwidth Control Overview; What You Can Do

Chapter 14 Bandwidth Control
XGS1930 Series User’s Guide
146
CHAPTER 14
Bandwidth Control
14.1 Bandwidth Control Overview
This chapter shows you how you can cap the maximum bandwidth using the Bandwidth Control screen.
Bandwidth control means defining a maximum allowable bandwidth for incoming and/or out-going
traffic flows on a port.
14.1.1 What You Can Do
Use the Bandwidth Control screen (Section 14.2 on page 146) to limit the bandwidth for traffic going
through the Switch.
14.2 Bandwidth Control Setup
Click Advanced Application > Bandwidth Control in the navigation panel to bring up the screen as
shown next.