Chapter 35 Maintenance
XGS1930 Series User’s Guide
285
35.9.1 Tech-Support Download
When you click Download to save your current Switch configuration to a computer, the following screen
appears. When the log report has downloaded successfully, click Back to return to the previous screen.
Figure 205 Management > Maintenance > Tech-Support: Download
35.10 Technical Reference
This section provides technical background information on the topics discussed in this chapter.
35.10.1 FTP Command Line
This section shows some examples of uploading to or downloading files from the Switch using FTP
commands. First, understand the filename conventions.
35.10.2 Filename Conventions
The configuration file (also known as the romfile or ROM) contains the factory default settings in the
screens such as password, Switch setup, IP Setup, and so on. Once you have custom the Switch’s
settings, they can be saved back to your computer under a filename of your choosing.
Memory Section Click Download to see the memory section log report. This log report is stored in flash
memory.
Mbuf Click Download to see the Mbuf log report. The log includes Mbuf over threshold
information. This log report is stored in flash memory.
ROM Click Download to see the Read Only Memory (ROM) log report. This report is stored in
flash memory.
L3 Click Download to see the layer-3 Switch log report. The log only applies to the layer-3
Switch models. This report is stored in flash memory.
Table 144 Management > Maintenance > Tech-Support
LABEL DESCRIPTION
To Next Page
Loading...
