XGS1930 Series User’s Guide
317
40.3 Clustering Management Configuration
Use this screen to configure clustering management. Click Management > Cluster Management >
Configuration to display the next screen.
Figure 231 Management > Cluster Management > Configuration
Model This field displays the model name.
Status This field displays:
Online (the cluster member switch is accessible)
Error (for example the cluster member switch password was changed or the switch was set as the
manager and so left the member list, etc.)
Offline (the switch is disconnected - Offline shows approximately 1.5 minutes after the link
between cluster member and manager goes down)
Table 164 Management > Cluster Management: Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
