ZyXEL Communications XGS1930-52HP - LLDP Remote Status

Chapter 31 Link Layer Discovery Protocol (LLDP)
XGS1930 Series User’s Guide
239
31.5 LLDP Remote Status
This screen displays a summary of LLDP status for each LLDP connection to a neighboring Switch. Click
Advanced Application > LLDP > LLDP Remote Status (Click Here) to display the screen as shown next.
Figure 167 Advanced Application > LLDP > LLDP Remote Status (Standalone mode)
The following table describes the labels in this screen.
Network Policy
TLV
This displays a network policy for the specified application.
•Voice
• Voice-Signaling
•Guest-Voice
• Guest-Voice-Signaling
• Softphone-Voice
• Video-Conferencing
•Streaming-Video
• Video-Signaling
Location
Identification
TLV
This shows the location information of a caller by its ELIN (Emergency Location Identifier
Number) or the IETF Geopriv Civic Address based Location Configuration Information (Civic
Address LCI).
• Coordinate-based LCI - latitude, longitude and altitude coordinates of the location
Configuration Information (LCI)
• Civic LCI - IETF Geopriv Civic Address based Location Configuration Information
• ELIN - (Emergency Location Identifier Number)
Table 116 Advanced Application > LLDP > LLDP Local Status > LLDP Local Port Status Detail
LABEL DESCRIPTION
Table 117 Advanced Application > LLDP > LLDP Remote Status
LABEL DESCRIPTION
Index The index number shows the number of remote devices that are connected to the Switch.
Click on an index number to view the detailed LLDP status for this remote device in the LLDP
Remote Port Status Detail screen.
Local Port This is the number of the Switch’s port that received LLDPDU from the remote device.
Chassis ID This displays the chassis ID of the remote device associated with the transmitting LLDP agent.
The chassis ID is identified by the chassis ID subtype. For example, the MAC address of the
remote device.
Port ID This is an alpha-numeric string that contains the specific identifier for the port from which this
LLDPDU was transmitted. The port ID is identified by the port ID subtype.
Port Description This displays a description for the port from which this LLDPDU was transmitted.
System Name This displays the system name of the remote device.
Management
Address
This displays the management address of the remote device. It could be the MAC address or
IP address. You can click on the IP address hyperlink directly.