Chapter 8 Basic Setting
XGS1930 Series User’s Guide
87
Figure 64 Basic Setting > PoE Setup > PoE Time Range Status
The following table describes the labels in this screen.
8.8.2 PoE Setup
Use this screen to set the priority levels, power-up mode and schedule for the Switch in distributing power
to PDs.
Click the PoE Setup link in the Basic Setting > PoE Setup screen. The following screen opens.
Table 30 Basic Setting > PoE Setup > PoE Time Range Status
LABEL DESCRIPTION
Port This is the number of the port on the Switch.
Time Range This field displays the name of the schedule which is applied to the port. PoE is enabled at the
specified time/date.
state This field displays whether the port can receive power from the Switch (In) or not (Out) currently.
It shows - if there is no schedule applied to the port.
To Next Page
Loading...
