XGS1930 Series User’s Guide
277
CHAPTER 35
Maintenance
35.1 Overview
This chapter explains how to configure the screens that let you maintain the firmware and configuration
files.
35.1.1 What You Can Do
• Use the Maintenance screen (Section 35.2 on page 277) to erase running configuration, save a
configuration file or restart the Switch.
• Use the Firmware Upgrade screen (Section 35.6 on page 281) to upload the latest firmware.
• Use the Restore Configuration screen (Section 35.7 on page 282) to upload a stored device
configuration file.
• Use the Backup Configuration screen (Section 35.8 on page 283) to save your configurations for later
use.
• Use the Tech-Support screen (Section 35.9 on page 283) to create reports for customer support if
there are problems with the Switch.
35.2 The Maintenance Screen
Use this screen to manage firmware and your configuration files. Click Management > Maintenance in
the navigation panel to open the following screen.
Figure 196 Management > Maintenance
To Next Page
Loading...
