ZyXEL Communications XGS1930-52HP - Configuring Switch Management IP Address

Chapter 5 Initial Setup Example
XGS1930 Series User’s Guide
57
Figure 39 Initial Setup Network Example: Port VID
1 Click Advanced Applications > VLAN > VLAN
Configuration in the navigation panel. Then click
the VLAN Port Setup link.
2 Enter 2 in the PVID field for port 2 and click Apply to
save your changes back to the run-time memory.
Settings in the run-time memory are lost when the
Switch’s power is turned off.
5.2 Configuring Switch Management IP Address
The default management IP address of the Switch is 192.168.1.1. You can configure another IP address in
a different subnet for management purposes. The following figure shows an example.