Chapter 4 The Web Configurator
XGS1930 Series User’s Guide
47
Figure 33 Wizard > VLAN > VLAN Setting
Each field is described in the following table.
QoS
In QoS, you can create QoS settings.
In order to create QoS settings, please do the following. Click Wizard > QoS > QoS Setting to access this
screen.
Table 13 Wizard > VLAN > VLAN Setting
LABEL DESCRIPTION
VLAN Setting
Default VLAN 1 /
Access Untagged
port
Select ports and use the right arrow to add them as the untagged ports to a VLAN group.
VLAN member port
VLAN Type a number between 2 and 4094 to create a VLAN ID.
Type the VLAN ID that you want to edit.
Trunk Tagged port Select ports and use the downward arrow to add them as the tagged ports to the VLAN
group(s) you created.
Finish Review the information and click Finish to create the task.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
