Chapter 17 Link Aggregation
XGS1930 Series User’s Guide
154
Figure 111 Advanced Application > Link Aggregation
The following table describes the labels in this screen.
Table 70 Advanced Application > Link Aggregation
LABEL DESCRIPTION
Group ID This field displays the group ID to identify a trunk group, that is, one logical link containing multiple
ports.
Enabled Ports These are the ports you have configured in the Link Aggregation screen to be in the trunk group.
The port number(s) displays only when this trunk group is activated and there is a port belonging
to this group.
Synchronized
Ports
These are the ports that are currently transmitting data as one logical link in this trunk group.
Aggregator ID Link Aggregator ID consists of the following: system priority, MAC address, key, port priority and
port number. Refer to Link Aggregation ID on page 153 for more information on this field.
The ID displays only when there is a port belonging to this trunk group and LACP is also enabled
for this group.
To Next Page
Loading...
