Chapter 18 Port Authentication
XGS1930 Series User’s Guide
165
Figure 120 Guest VLAN Example
Use this screen to enable and assign a guest VLAN to a port. In the Port Authentication > 802.1x screen
click Guest Vlan to display the configuration screen as shown.
Figure 121 Advanced Application > Port Authentication > 802.1x > Guest VLAN
The following table describes the labels in this screen.
Table 74 Advanced Application > Port Authentication > 802.1x > Guest VLAN
LABEL DESCRIPTION
Port This field displays a port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
To Next Page
Loading...
