Chapter 48 Port Status
XGS1930 Series User’s Guide
340
The following table describes the labels in this screen.
Table 176 Port Status: Utilization
LABEL DESCRIPTION
Port This identifies the Ethernet port. In stacking mode, the first number represents the slot and the
second the port number.
Link This field displays the speed (either 10M for Mbps, 100M for 100 Mbps, 1000M for 1000 Mbps, or 10G
for 10 Gbps) and the duplex (F for full duplex). It also shows the cable type (Copper or Fiber) for
the combo ports. This field displays Down if the port is not connected to any device.
Tx kB/s This field shows the transmission speed of data sent on this port in kilobytes per second.
Tx Utilization% This field shows the percentage of actual transmitted frames on this port as a percentage of the
Link speed.
Rx kB/s This field shows the transmission speed of data received on this port in kilobytes per second.
Rx Utilization% This field shows the percentage of actual received frames on this port as a percentage of the Link
speed.
To Next Page
Loading...
