Chapter 4 The Web Configurator
XGS1930 Series User’s Guide
50
The following table describes the links in the navigation panel.
Table 15 Navigation Panel Sub-links Overview
BASIC SETTING ADVANCED APPLICATION IP APPLICATION MANAGEMENT
Table 16 Navigation Panel Links
LINK DESCRIPTION
Basic Settings
System Info This link takes you to a screen that displays general system information.
General Setup This link takes you to a screen where you can configure general identification information
about the Switch.
Switch Setup This link takes you to a screen where you can set up global Switch parameters such as VLAN
type, GARP and priority queues.
IP Setup This link takes you to a screen where you can configure the IP address and subnet mask
(necessary for Switch management) and set up to 32 IP routing domains.
Port Setup This link takes you to a screen where you can configure settings for individual Switch ports.
PoE Setup For PoE model(s).
This link takes you to a screen where you can set priorities, PoE power-up settings and schedule
so that the Switch is able to reserve and allocate power to certain PDs.
Interface Setup This link takes you to a screen where you can configure settings for individual interface type
and ID.
IPv6 This link takes you to a screen where you can view IPv6 status and configure IPv6 settings.
DNS This link takes you to a screen where you can configure DNS (domain name server) IP
addresses.
Cloud
Management
This link takes you to a screen where you can enable or disable the Nebula Center Control
Discovery feature. If it’s enabled, you can have the Switch connect to the NCC (Nebula
Control Center). Otherwise, clear the checkbox to disable it.
Advanced Application
To Next Page
Loading...
