Chapter 3 Web Configurator
ZyWALL USG 20/20W User’s Guide
44
2 Open your web browser, and go to http://192.168.1.1. By default, the ZyWALL
automatically routes this request to its HTTPS server, and it is recommended to
keep this setting. The Login screen appears.
Figure 6 Login Screen
3 Type the user name (default: “admin”) and password (default: “1234”).
If your account is configured to use an ASAS authentication server, use the OTP
(One-Time Password) token to generate a number. Enter it in the One-Time
Password field. The number is only good for one login. You must use the token to
generate a new number the next time you log in.
4 Click Login. If you logged in using the default user name and password, the
Update Admin Info screen (Figure 7 on page 44) appears. Otherwise, the
dashboard (Figure 8 on page 45) appears.
Figure 7 Update Admin Info Screen
To Next Page
Loading...
