Management and Diagnostic Console
87
The Edit VoIP Settings panel displays the current SIP settings, and allows you to edit the settings. The
following table describes the fields.
By default, the Show CID Names and Require Authentication checkboxes are checked. Show CID Names allows
the gateway to display the configured outbound caller ID information.
Require Authentication allows the
gateway to use authentication when registering with the SIP proxy.
Use 11-digit DIDs allows the gateway to
automatically append a “1” to the registration phone number.
Server
IP Address Corresponds to the SIP proxy address.
Port Corresponds to the SIP proxy destination port.
Number of Lines Displays the number of lines allowed on the gateway.
End Point
Domain Displays the IP domain of the SIP endpoint.
Register Expire Time Displays the default expiration (in seconds) of the SIP
registration, and indicates how frequently re-registration will
occur.
Register Retry Interval Indicates the period of time (in seconds) before the gateway will
retry registration after a failed attempt.
To Next Page
Loading...
