2Wire Gateway - Reviewing Training History

Management and Diagnostic Console
90
Reviewing Training History
The Training History pane provides a record of the last 20 connection attempts. The current connection or
connection attempt is displayed in the last row.
Impulse noise
protection
Measurement of how much
impulse noise can be miti-
gated. Dependent on the cur-
rent line configuration.
Delay of latency
path
Measurement of how much
delay is introduced. Depen-
dent on the current line config-
uration.
Item Description
Time Initially this field will display the time (since power on) in DAYS HH:MM:SS format,
until the gateway can access the Internet and retrieve the current local time. Sub-
sequently the time (since power on) is displayed in YY:MM:DD and HH:MM:SS for-
mat.
Line The line (1 or 2) on which the gateway is searching for a DSL signal.
Downstream
Rate The net user data rate (in kbps) for the connection.
Max 1 Maximum rate achievable at the time of the initial connection based on the line
quality (specifically, the uncapped rate).
Max 2 Latest estimate of maximum achievable rate adjusted for changing line conditions.
Max 3 Current or final estimated maximum achievable rate without impulse noise com-
pensation.
Mgn 1 Noise margin (in dB) at the start of the connection.
Mgn 2 Latest noise margin adjusted for changing line conditions since the connection was
first established.
Attn Measured attenuation (in dB) of the line.
Pwr Transmit power (in dB).
CRCs Total uncorrected errors for this connection.
FECs Total corrected errors for this connection.
INP Impulse noise protection.
DLY Delay of latency path.
Item Description Value Comment