3Com 3C509B - Connecting a BNC Port to the Network; Connecting to the BNC Port on the 3 C509 B-TPC NIC

Connecting to the Network 23
Connecting a BNC Port to the Network
Follow these steps to connect the BNC port on the
3C509B-TPC and COMBO NICs to the network:
1 Connect the BNC connector on the thin Ethernet
coaxial cable to the BNC port on the NIC, as shown
in Figure 4.
Figure 4 Connecting to the BNC Port on the 3C509B-TPC NIC
2 Connect the other end of the network cable to
another PC or a 50-ohm terminator.
Go to “Link LED” on page 25.
BNC connector
BNC port
Book Page 23 Monday, June 7, 1999 8:55 AM