32 CHAPTER 2: CUSTOM INSTALLATION SETUP FOR WINDOWS 95/98
Figure 9 New Hardware Found Screen
2 Insert EtherDisk diskette 2 in drive A, and click OK.
The Install From Disk screen appears.
Figure 10 Install From Disk Screen
3 Make sure that the drive letter in the field
corresponds to the diskette drive containing the
EtherDisk diskette. Click OK.
Windows 95 copies files from the EtherDisk diskette to the
PC hard drive and builds a driver information database.
■ If you have never assigned computer and workgroup
names for this PC, Windows displays the Network
screen (Figure 11). In this case, continue at step 4.
■ If you have previously assigned computer and
workgroup names for this PC, the 3Com Installation
Wizard starts. In this case, go to Chapter 3. You can
change the Network screen fields later, as described in
“Identifying Your PC on the Network” on page 59.
Book Page 32 Monday, June 7, 1999 8:55 AM
To Next Page
Loading...
