Configuring TCP/IP 55
If a test fails, a message indicates the error type. Click
the Help button in the error message screen to obtain
more information. Chapter 6 provides additional
troubleshooting help.
A message confirms that the connection to the
DHCP server is functioning.
3 Click Next.
Go to “Configuring DNS” on page 56.
To Specify an IP Address Manually
Follow these steps to specify an IP address manually:
1 Select the Specify an IP address manually radio button.
2 Click Next.
The Specify an IP Address screen appears.
Figure 33 Specify an IP Address Screen
Book Page 55 Monday, June 7, 1999 8:55 AM
To Next Page
Loading...
