Installing NetWare Drivers for DOS, Windows 3.1,
and Windows for Workgroups
83
7 When the Intelligent Auto Install process is finished,
remove EtherDisk diskette 2 from drive A and reboot
the PC.
If you are running Windows 3.1x, after you connect to
the NetWare server, run the WSINSTALL program for full
Windows support. Contact your system administrator
for the location of this NetWare utility.
If problems occur only when using the Intelligent Auto
Install program, display or print the COMSLINK.LOG file to
see a list of all events occurring during the Intelligent Auto
Install installation and configuration process.
■ To display the file, enter:
type comslink.log | more
■ To print the file, enter:
print comslink.log
To install the network drivers for Windows 3.1x,
Windows for Workgroups, or DOS in a non-NetWare
environment, see the appropriate text files in the
HELP directory on EtherDisk diskette 2.
Obtaining NetWare Loadable Modules
You can obtain current NetWare Loadable Modules (NLMs)
for the NetWare servers listed in Table 5 from the Novell Web
site, www.support.novell.com.
The 3C509B NIC no longer supports NetWare 3.11
and 4.0x servers.
Table 5 NetWare NLMs
NetWare Server NLM Name
NetWare 3.12 ETHERTSM.NLM
NBI31X.NLM
MSM31X.NLM
NetWare 4.11, 4.1 ETHERTSM.NLM
NBI.NLM
MSM.NLM
Book Page 83 Monday, June 7, 1999 8:55 AM
To Next Page
Loading...
