3Com 3C509B - Install from Disk Screen; Select Device Screen

44 CHAPTER 2: CUSTOM INSTALLATION SETUP FOR WINDOWS 95/98
Figure 23 Select Device Screen
5 Insert EtherDisk diskette 1 in drive A and click
Have Disk.
The Install from Disk screen appears.
Figure 24 Install from Disk Screen
6 If it is not already displayed in the Copy manufacturer’s
files from entry box, enter:
a:\
7 Click OK.
The Select Device screen shown in Figure 25 appears,
with 3Com EtherLink 10 ISA (3C509/3C509b) in
Legacy mode selected.
Book Page 44 Monday, June 7, 1999 8:55 AM