Completing the Installation and Configuration 63
Figure 40 Installation Complete Screen
5 Click Finish.
If you are running Windows 95 on your PC, go to
“Windows 95” (in the next section).
If you are running Windows 98 on your PC, go to
“Windows 98” on page 65.
Completing the Installation and Configuration
Procedures for completing the installation and configuration
differ for Windows 95 and Windows 98.
Windows 95
This section describes how to complete the NIC installation
and configuration under Windows 95 after you close
the 3Com Installation Wizard (at step 5 in the
preceding section).
■ If your PC is running Windows 95 version 950 (version A),
the New Hardware Found Screen appears briefly. Wait
a few seconds. The Insert Disk dialog box appears,
prompting you for the Windows 95 CD.
Book Page 63 Monday, June 7, 1999 8:55 AM
To Next Page
Loading...
