62 CHAPTER 3: USING THE 3COM INSTALLATION WIZARD FOR WINDOWS 95/98
2 Select the check boxes for tests that you want to run
in future installations, and then click Next.
The Save Installation Settings screen appears.
Figure 39 Save Installation Settings Screen
3 Enter the path for the EtherDisk diskette that you
are using.
This installation diskette is first copied to a temporary
directory, and then that file is copied to the drive that you
indicate. If you are saving to a diskette, insert a blank,
formatted diskette in drive A. Upon completion, remove
the diskette from the drive. You can use this diskette to
perform future installations.
Otherwise, enter the name of the drive (for example, C:\)
where you want to save the installation settings.
4 Click Next.
The Installation Complete screen appears, as shown
in Figur
e 40.
Book Page 62 Monday, June 7, 1999 8:55 AM
To Next Page
Loading...
