36 CHAPTER 2: CUSTOM INSTALLATION SETUP FOR WINDOWS 95/98
4 Click Finish.
The Insert Disk dialog box appears, prompting you for
the disk labeled:
3Com EtherDisk for EtherLink 10 ISA Family
Adapters (Disk 1)
5 Click OK.
The Copying Files dialog box appears, prompting you
for the location of files on EtherDisk diskette 1:
6 If it is not already displayed in the Copy files from
entry box, type:
a:\
7 Click OK.
Windows 95 copies files from the EtherDisk diskette to the
PC hard drive and builds a driver information database.
■ If you have never assigned computer and workgroup
names for this PC, Windows displays the Network
screen (Figure 15). In this case, continue at step 8.
■ If you have previously assigned computer and
workgroup names for this PC, the 3Com Installation
Wizard starts. In this case, go to Chapter 3. You can
change the Network screen fields later, as described in
“Identifying Your PC on the Network” on page 59.
Figure 15 Network Screen
8 Click OK.
The Identification tab of the Network screen appears, as
shown in Figure 16.
Book Page 36 Monday, June 7, 1999 8:55 AM
To Next Page
Loading...
