CHAPTER 13: CONFIGURING QUALITY OF SERVICE
162
The Voice VLAN Summary Page contains information about the Voice
VLAN currently enabled on the device, including the ports enabled and
included in the Voice VLAN.
To view Voice VLAN Settings:
1 Click Device > QoS > VoIP > Traffic Setting > Summary.
The Voice VLAN Summary Page opens.
Figure 88 Voice VLAN Summary Page
Viewing Voice VLAN
The Voice VLAN Summary Page contains the following fields:
Voice VLAN State — Indicates if Voice VLAN is enabled on the
device. The possible field values are:
Enabled — Enables Voice VLAN on the device.
Disabled — Disables Voice VLAN on the device. This is the
default value.
Voice VLAN ID — Defines the Voice VLAN ID number.
Voice VLAN Aging Time — Indicates the amount of time after
the last IP phone’s OUI is aged out for a specific port. The port will
age out after the bridge and voice aging time. The default time is
one day. The field format is Day, Hour, Minute. The aging time
starts after the MAC Address is aged out from the Dynamic MAC
To Next Page
Loading...
