CHAPTER 13: CONFIGURING QUALITY OF SERVICE
163
Address table. The default time is 300 sec. For more information on
defining MAC address age out time, see Defining Aging Time.
Ports Enabled for Voice VLAN — Displays the ports on which
Voice VLAN is enabled.
Ports in the Voice VLAN — Displays the active ports which are
included in the Voice VLAN currently.
The Voice VLAN Setup Page provides information for enabling and
defining Voice VLAN globally on the device.
To configure Voice VLAN Settings:
1 Click Device > QoS > VoIP > Traffic Setting > Setup. The Voice
VLAN Setup Page opens.
Figure 89 Voice VLAN Setup Page
Defining Voice
VLANs
The Voice VLAN Setup Page contains the following fields:
Voice VLAN Status — Indicates if Voice VLAN is enabled on the
device. The possible field values are:
Enabled — Enables Voice VLAN on the device.
Disabled — Disables Voice VLAN on the device. This is the
default value.
To Next Page
Loading...
