CHAPTER 4: MANAGING DEVICE SECURITY
50
Defining 802.1X
Authentication
Reauthentication Period — Displays the time span (in seconds)
in which the selected port is reauthenticated. The field default is
3600 seconds.
Authenticator State — Displays the current authenticator state.
Termination Cause — Indicates the reason for which the port
authentication was terminated.
2 Click Apply. Port Authentication is enabled, and the device is up-
dated.
The 802.1X Setup Page contains information for configuring 802.1X
global settings on the device and defining specific 802.1X setting for
each port individually.
Monitor users have no access to this page.
To configure 802.1X Settings:
1 Click Security > 802.1X > Setup. The 802.1X Setup Page opens.
Figure 26 802.1X Setup Page
To Next Page
Loading...
