3Com 5500-SI - Page 208

208 CHAPTER 15: SSH TERMINAL SERVICES
Network diagram
Figure 50 Network diagram for SSH client configuration
Configuration procedure
1 Configure the client to run the initial authentication.
[S5500] ssh client first-time enable
2 Configure server public keys on the client.
[S5500] rsa peer-public-key public
[S5500-rsa-public-key] public-key-code begin
[S5500-rsa-key-code] 308186028180739A291ABDA704F5D93DC8FDF84C427463
[S5500-rsa-key-code] 1991C164B0DF178C55FA833591C7D47D5381D09CE82913
[S5500-rsa-key-code] D7EDF9C08511D83CA4ED2B30B809808EB0D1F52D045DE4
[S5500-rsa-key-code] 0861B74A0E135523CCD74CAC61F8E58C452B2F3F2DA0DC
[S5500-rsa-key-code] C48E3306367FE187BDD944018B3B69F3CBB0A573202C16
[S5500-rsa-key-code] BB2FC1ACF3EC8F828D55A36F1CDDC4BB45504F020125
[S5500-rsa-key-code] public-key-code end
[S5500-rsa-public-key] peer-public-key end
[S5500] ssh client 10.165.87.136 assign rsa-key public
3 Start SSH client.
Settings for the two authentication types are described respectively in the following:
a Use the password authentication and start the client using the default encryption
algorithm.
[S5500] ssh2 10.165.87.136
username: client003
Trying 10.165.87.136
Press CTRL+K to abort
Connected to 10.165.87.136...
The Server is not autherncated.Do you continue access it?(Y/N):y
Do you want to save the server's public key?(Y/N):y
Enter password:
*********************************************************
* All rights reserved (1997-2005) *
* Without the owner's prior written consent, *
*no decompiling or reverse-engineering shall be allowed.*
*********************************************************
<S5500>
PC
IP address ： 10.165.87.136
SSH Client
Switch B
SSH Server
Switch A
PC
IP address ： 10.165.87.136
SSH Client
Switch B
SSH Server
Switch A