3Com 5500-SI - Displaying Information about a Specified Optical Port

Displaying Information About a Specified Optical Port 77
Displaying
Information About a
Specified Optical Port
You can use the display transceiver-information interface command to display the
following information about a specified optical port:
■ Hardware type
■ Interface type
■ Wavelength
■ Vender
■ Serial number
■ Transfer distance
Table 59 Display information about a specified optical port
Operation Command Description
Display information about a
specified optical port
display
transceiver-information
interface interface-type
interface-number
You can execute the display command
in any view.