3Com 5500-SI - Member Device Configuration; Enabling System and Port NDP; Enabling System and Port NTDP; Specifying the Cluster FTP;TFTP Server

608 CHAPTER 32: CLUSTERING
Member Device
Configuration
Member device configuration involves:
■ Enable system and port NDP
■ Enable system and port NTDP
■ Specifying the cluster FTP/TFTP server
Enabling System and
Port NDP
Enabling System and
Port NTDP
Specifying the cluster
FTP/TFTP server
Table 665 Enable system and port NDP
Operation Command Remark
Enter system view system-view —
Enable system NDP ndp enable Required
Enable port NDP ndp enable interface port-list Optional
Enter the Ethernet port interface interface-type
interface-number
—
Enable port NDP ndp enable Required
Table 666 Enable system and port NTDP
Operation Command Remark
Enter system view system-view —
Enable system NTDP ntdp enable Required
Enter the Ethernet port interface interface-type
interface-number
—
Enable port NTDP ntdp enable Required
Table 667 Enable the cluster FTP/TFTP server
Operation Command Description
Establish a connection with the cluster
FTP server
ftp cluster Optional
Download a file from the cluster TFTP
server
tftp cluster get source-file [
destination-file ]
Optional
Upload a file to the cluster TFTP server tftp cluster put source-file [
destination-file ]
Optional