3Com 5500-SI - Page 39

Command Line Interface 39
VLAN Interface
View
Configure IP
interface
parameters for a
VLAN or a VLAN
aggregation
[SW5500-Vlan-interface1] Enter interface
vlan-interface 1 in
System View
quit returns to
System View
return returns to
User View
Local-User
View
Configure local
user parameters
[SW5500-luser-user1] Enter local-user user1
in System View
quit returns to
System View
return returns to
User View
User Interface
View
Configure user
interface
parameters
[SW5500-ui0] Enter user-interface 0
in System View
quit returns to
System View
return returns to
User View
FTP Client View Configure FTP
Client parameters
[SW5500-ftp] Enter ftp in User View quit returns to
System View
RSA Public Key
View
Configure RSA
public key of SSH
user
[SW5500-rsa-public-key] Enter rsa
peer-public-key
SW5500003 in System View
peer-public-key
end returns to System
View
RSA Key Code
View
Edit RSA public
key of SSH user
[SW5500-rsa-key-code] Enter public-key-code
begin in RSA Public Key
View
public-key-code
end returns to RSA
Public Key View
PIM View Configure PIM
parameters
[SW5500-PIM] Enter pim in System View quit returns to
System View
return returns to
User View
RIP View Configure RIP
parameters
[SW5500-rip] Enter rip in System View quit returns to
System View
return returns to
User View
OSPF View Configure OSPF
parameters
[SW5500-ospf] Enter ospf in System View quit returns to
System View
return returns to
User View
OSPF Area
View
Configure OSPF
area parameters
[SW5500-ospf-0.0.0.1] Enter area 1 in OSPF View quit returns to OSPF
View
return returns to
User View
Route Policy
View
Configure route
policy parameters
[SW5500-route-policy] Enter route-policy
policy1 permit node
10 in System View
quit returns to
System View
return returns to
User View
Basic ACL View Define the rule of
basic ACL
[SW5500-acl- basic-2000] Enter acl number 2000
in System View
quit returns to
System View
return returns to
User View
Advanced ACL
View
Define the rule of
advanced ACL
[SW5500-acl-adv-3000] Enter acl number 3000
in System View
quit returns to
System View
return returns to
User View
Layer-2 ACL
View
Define the rule of
layer-2 ACL
[SW5500-acl-ethernetframe-4000] Enter acl number 4000
in System View
quit returns to
System View
return returns to
User View
Table 5 Features of Command Views (continued)
Command
view
Function Prompt Command to enter Command to exit